|
Power
Quality/Factor |
Transformers |
Switch
Gear (11-800kV) |
Ancillary
Equipment |
Consulting |
Protection
Monitoring |
|
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
||||
 |
 |
 |
|||||
 |
 |
||||||
 |
 |
| Samwha
Capacitors |
|||
|
|
These capacitors are designed for power factor
correction and harmonics filtration in power networks. They are all-film dielectric and impregnated with an environmentally friendly, Non-PCB biodegradable insulating oil. In addition each capacitor is provided with an internal discharge resistor. All SAMWHA capacitors comply with most national and international capacitor standards. Capacitor Loss (Under Stabilized Condition) 0.2W/kvar or Less with Internal fuse 0.15W/kvar or Less without Internal fuse Ambient Temperature -40° / A (+40°), B (+45°), C (+50°), D (+55°) Max overvoltage Umax UN + 10% (up to 8 hours daily) UN + 15% (up to 30 minutes daily) UN + 20% (up to 5 minutes) UN + 30% (up to 1 minute) Max overcurrent IS 1.3 × IN Painting Color Munsell No. 5Y 7/1 Reference Standard IEC 60871  |
|
|
 |
|||
-Capacitor
benefits